20 for 2020 Website Homepage Banner 1920x800

 

20% off our Vision Engineering range including the award winning Mantis stereo inspection system!

Our 20% for 2020 includes the entire product range - both stereo inspection microscopes and metrology systems

Click here to save 20% off today

Lynx promotion3

Utilising stereo inspection for electronics   

Vision Engineering's Mantis stereo inspection system and the Lynx EVO, designed to increase productivity through superior ergonomics.

Not only is every aspect of the stereo systems designed for optimum ergonomics, but each system has been designed to enhance inspection and rework of PCBs including:

  • Large field-of-view to maximise the width of the board and all its components, whether you are inspecting at 2x or 20x.
  • Optimum depth-of-field to enhance inspection of a wide range of components including BGA joints or the underfill on CSPs.
  • Switch between white LEDs and ultraviolet (UV) for inspecting the quality of conformal coatings.
  • Utilise the episcopic illumination for looking at connectors and densely populated PCBs, where inspecting for placement accuracy can be challenging.
  • Rework misalignments, solder bridges or tombstoning with generous working distances (depending on magnification). 

Click here to save 20% off today

 

Mantis

The Mantis family includes Mantis Elite-Cam, enabling engineers to capture, annotate and create reports on their inspection anomalies. 

 

Lynx

The Lynx-EVO is available with an oblique viewer, so the boards can be inspected at 360 degrees at a 34 degree angle - ideal for inspecting soldered leads. 

         

Includes the DRV-Z1 Digital 3D Imaging System 

  
DRV-Z1 is a digital stereo 3D viewer with zoom that brings together the benefits of optical stereo microscopy and digital technology into a single unique system.
  • 6x – 186x magnification
  • Digital stereo 3D with vivid depth perception
  • Remote viewing of stereo 3D images in real-time

*End of Year Promotion 2020 - Distributor Terms and Conditions.  The Vision Engineering ‘20for2020’ promotion runs from 19/10/2020 to 31/12 2020.  Orders must be placed by 11.59pm 31/12/2020 Australian Eastern Standard Time (AEST).  Offers are subject to availability and only in participating regions.  The promotion applies to sales of all complete Vision Engineering systems excluding: Deltron, Camß, Vision LUXO bench magnifiers, and Falcon.  A ‘system’ is defined by a head, stand/stage and lens. Power supply and Controller/Software may also be required for a complete system.  Accessories bought as part of a larger system purchase on a single order will qualify for the discount.  Please mention the relevant offer and promotion code (20FOR2020) in all correspondences and when placing an order.  Promotion cannot be used in conjunction with any other promotion, special pricing or existing special discounts.  Hawker Richardson reserves the right to alter or amend these terms and conditions and any other conditions applicable to an offer or promotion at any time.