|Swift Pro Dual Duo
Uncertainty formula U952D = 5+(6.5L/1000)µm
Where L = length in mm, using controlled conditions with 100x magnification at the standard measuring plane. Increased accuracies may be obtained over shorter measuring lengths and by in situ system calibration.
(Z) Z-axis accuracy 10μm, using controlled conditions with 100x magnification
High definition 2MP video camera.
Patented twin pupil monoscopic Dynascope™, infinity corrected optical system, with pre-centred crossline graticule to both eyes.
§ Option of custom designed graticule, pre-centred to one eye
Magnification Options (System Total)
Quick change magnification options:
§ 1x objective, 10x total magnification
§ 2x objective, 20x total magnification
§ 5x objective, 50x total magnification
§ 10x objective, 100x total magnification
Precision measuring stage, with factory-set Non-Linear Error Correction (NLEC) calibration as standard
(X, Y): 200mm x 100mm or 150mm x 100mm stage options
(Z) for 3 axis variant: 98mm
100mm of height adjustment.
X = 1µm Y = 1µm Z = 0.5µm
Substage and surface illumination provides the ability to measure both profile and surface features.
- Enhance substage illumination.
- Quadrant Surface Illumination with cool, corrected colour temperature LEDs.
- Illumination control via Software.
- Substage iris control.
- A = 680mm (max)
- B = 515mm
- C = 480mm
The Swift PRO Duo comes with a choice of industry leading M-series metrology software or robust QC 3000 microprocessor.
M-series Measuring Software
Renowned M-series software carries out basic to advanced measurement applications with ease and with minimal training. An intuitive user interface would appeal to a wide user base, ranging from machine operators on the shop floor to metrologists in a QC lab.
- Intuitive PC-based metrology software enabling viewing on large monitors
- Quick profile and surface measurement without pre-programming
- Programmable light control
- Easy reporting
- CAD like Part View mark-up for easy inspection of the measured data
- DXF import/export
- Thread and wire measurement options
- Multiple video tools, from cross hair to full video edge detection
QC 3000 Microprocessor
Thanks to its sleek but robust industrial design, the QC 3000 is ideal for applications in harsh production environments to measure 2D geometric features quickly and easily.
The flat aluminium housing with integrated power pack and fan less passive cooling is extremely sturdy and tolerant to negative influences.
The 12.1” touchscreen of specially hardened glass supports multi-touch gesture control and can be operated with gloves.
- Shortcut icons for measurement of common geometric features. (e.g. point, line, circle, slot and rectangle)
- Video edge detection (VED) provides multiple tools for edge detection and selection of points for measurement
- Measure the points manually or automatically
- Easily create reports generated immediately after measurement
- Robust IP65 splash proof touch screen panel, ideal for the shop floor
Want to increase speed, productivity and accuracy?
The Swift Pro Duo combines the power of both optical and video measurement in one compact system.
With a rich suite of measurement and reporting features, the Swift Pro Duo is ideal for a broad range of applications including:
- Medical devices
- General precision engineering
Video measurement is ideal for routine components where edges of features can easily be identified. The smart video measurement tools allow the operator to quickly detect and measure features faster and more accurately than ever before!
The Swift PRO Duo incorporates Vision’s patented Dynascope® eyepiece-less measuring microscope providing high contrast, microscope-resolution images.
Complex or difficult-to-view features can be viewed in intricate detail, ensuring you can take accurate measurements of all components.
When measuring features without clear edges, a video camera may be unable to detect the edges due to a lack of contrast. This is where optical measurement is beneficial. The high resolution crisp image from the optical head enables you to accurately select features to measure. Including clear or black plastics and surface features on metal parts (where there is no contrast between the feature and the background).
Switching from video measurement to optical measurement is as quick and simple as a touch of a button.
Increase Operator Performance and Productivity with Dynascope® technology
Designed with an ergonomic body position, the Swift Pro Duo offers ease of use, comfort and significantly reduces user fatigue and eyestrain.
The Dynascope® technology allows operators to take accurate measurements whilst wearing prescriptive glasses, safety goggles and contact lenses.
Businesses choose the Swift Pro Duo because they know their operators are more efficient, more accurate and more productive.
Measuring Stage Calibration with NLEC
Swift PRO Duo features Vision Engineering's proven 200mm x 100mm precision measuring stage.
Utilising the most accurate correction method available, non-linear error correction (NLEC) uses a software algorithm to calculate and correct any errors across the measuring stage. All measuring stages are factory-set with NLEC calibration prior to installation.