1300 36 00 31

 Follow Hawker Richardson on Linkedin  Follow Hawker Richardson on facebook Follow Hawker Richardson on Twitter Follow Hawker Richardson on Youtube  | About Us | Shop | BlogContact Us

RO-06-PLUS SMT Batch Reflow Oven for SMT

SMT batch reflow oven

Prototyping oven with motorized drawer for automatic processing. Combi-heater system convection/infrared ensures homogenous temperature distribution and enables steep ramps. Integrated microprocessor for profile control and storage.


Key features

  • Compact design
  • Automatic processing
  • Process area 400x300 mm
  • Microprocessor controlled

RO06-Plus Drawer-type batch reflow oven

In regard to component type, component density and board complexity, the soldering of state-of-the-art PCBs requires professional production equipment, especially in low-volume manufacturing. Solder quality equal to that in high-volume environments must be ensured.

To meet these requirements, the RO06 reflow oven is the ideal solution. The integrated convection heater with quartz lamp support for steep ramping, an automated process flow and the feasibility of storing various profiles have made the RO06 the preferred solution in the lab and in low-volume manufacturing all over the world.

  • Homogeneous convection heater
  • Quartz lamp supports quick heating
  • Lead-free or standard soldering profiles
  • Motor-driven drawer for automated process flow
  • Microprocessor control with large memory
  • Large viewing window for process monitoring
  • Unique pause function for process evaluation
  • External sensors for in-board measurements

Drawer-type batch reflow oven

reflow oven

Small but powerful reflow oven. 300 mm process width. Sophisticated zone separation between zones enables profiles that are normally possible only on larger and much more expensive systems. Small footprint 2.0x0.7 m.


Key features

  • 4 zone convection
  • 300 mm soldering with
  • Lead-free process approved
  • Soldering or curing


RO300-FC Hot air convection oven for all SMT applications

The RO300FC exclusively heats with hot air convection and can be used for the different tasks in SMT assembly, especially for the reflow soldering of lead free solder pastes or the curing of adhesives. It features easy operation, perfect reflow results and a robust construction. It is well suited for continuous production, small batch manufacturing and prototyping.

  • 100% convection heating
  • Equal heating rates
  • Minimum Delta-T
  • Precise temperature control
  • Soldering or curing applications
  • Small dimensions – high throughput
  • Volume or small series production
  • Graphical recording of temperature profiles



Full Convection Reflow Oven

reflow oven

Versatile reflow oven for medium volume soldering (leadfree or leaded solder). 400 mm process width. Integrated microprocessor for profile control and storage. Extra high air volume for perfect soldering of complex boards.


Key features

  • 5 zone reflow oven
  • 400 mm process width
  • Soldering or curing
  • Lead-free processing


RO400FC -Hot air full convection reflow oven

Soldering of complex SMD boards and new package technologies requires a well-controlled soldering process. The RO400FC uses full convection only to heat PCBs homogeniously. The convection technology uses vertical laminar flow, which offers an efficient heat transfer with the lowest delta T values. This technology makes the RO400FC suitable for lead free solders as well.

Zone temperatures – three preheat and one peak – are fully programmable, as is the closed-loop-controlled conveyor speed. Zone temperatures are measured within the airflow at the board height to guarantee highly reproducible soldering conditions.

The universal mesh belt or the precise chain conveyor transports single or double-sided boards up to 400 mm (15.7“) width.

  • Full convection heating for even temperature distribution
  • For solder pastes with or without lead
  • High air volume for low thermal stress
  • Efficient heat transfer
  • Mesh belt or chain conveyor
  • Closed loop controlled conveyor drive system
  • Integrated microprocessor control with LCD
  • Built-in overheat security switches

Hawker Richardson has a range of low cost entry level SMT PCB assembly equipment ideally suited to prototype and low volume manufacture. Manual SMT solder paste stencil printers, SMT PCB component placement, Reflow soldering, wave soldering and rework and visual inspection.

Hawker Richardson is the Australia & New Zealand for a range of low cost reliable entry level SMT / SMD assembly equipment suitable for Prototyping and low volume SMT / SMD PCB production.

Hawker Richardson also supplies semi automated and fully automatic in-line SMT / SMD stencil and screen printers, Pick and place machines and reflow soldering ovens and wave solder machines. As well as a range of ancillary products such as Electroformed [eform] or laser cut stencils and precision stainless steel or polyester mesh screens plus solder paste. PCB storage magazines, board handling equipment and de-paneling machines, AOI systems and assembly tools such as electric torque drivers and screw presenters.

Allow Hawker Richardson to be your partner in productivity.

Enquire Now

  1. Name(*)
    Please let us know your name.
  2. Company
    Invalid Input
  3. Phone
    Invalid Input
  4. Email(*)
    Please let us know your email address.
  5. How did you find us?(*)
    Invalid Input
  6. Optional Message(*)
    Please let us know your message.
  7. Invalid Input