1300 36 00 31

 Follow Hawker Richardson on Linkedin  Follow Hawker Richardson on facebook Follow Hawker Richardson on Twitter Follow Hawker Richardson on Youtube  | About Us | Shop | BlogContact Us

Yamaha YS Series YS100 and YS88 SMT Machine - SMT Assembly

Yamaha have released the NEW YS series of placement machines for the next generation of SMT production.

YS100

YS100 Yamaha SMT machineThanks to a high precision single placement beam that carries eight independent Z-servo controlled heads, the YS100 provides a perfect balance between chip and IC shooting. It is available in two versions: one with a Flying Nozzle Change (FNC) head for when many nozzle changes are needed and high output is important, the other with a Super Fine (SF) head for use with a wider component range including QFPs, connectors and tall components.

With placement rates up to 19.6k components per hour, the YS100 is fast. Placement accuracy is 30 microns for ICs. It handles a wide range of components from 0.4x0.2 mm (01005) to large connectors (100x45 mm), fine-pitch and components up to 15 mm tall. The YS100 holds up to 126 tape feeding positions.

Main benefits

The standard YS100 comes with software and hardware features to improve product quality, increase production efficiency, shorten NPI and changeover times and reduces maintenance, including:

  • Intelligent electrical feeders
  • Z-Servo controlled placement heads for accurate stress-free component mounting
  • Automatic board width and thickness adjustment for fast changeover
  • Automatic nozzle cleaning station
  • Automatic temperature feedback to compensate for temperature variations
  • Fiducial recovery function that eliminates the need to remove and clean the PCB
  • Feeder indicators that facilitate easy setup and reduce feeder setup
  • Double board support system for reducing board transfer time
  • Tape cutters

 

YS88

YS88 Yamaha SMT pick and place machineThe YS88 is equipped with 3 fully independent servo-controlled Flying Nozzle Change (FNC) heads, each carrying up to 6 nozzles. It delivers high-end performance with chips, ICs and odd form components. Not only does it offer placement rates up to 8.9k components per hour with a placement accuracy of 30 micron for ICs and QFPs, but it also handles an extremely wide component range as tall as 25.5mm. Precision force control allows optimal handling of press-fit through-hole connectors with forces up to 30N.

By holding up to 119 feeding positions, the YS88 offers the ultimate in changeover flexibility.

Main benefits

The standard YS88 comes with many software and hardware features that improve product quality, increase production efficiency and reduce maintenance, including:

  • Intelligent electrical feeders
  • Z-Servo controlled placement heads for accurate stress-free component mounting
  • Automatic board width and thickness adjustment for fast changeover
  • Automatic nozzle cleaning station
  • Automatic temperature feedback compensates for temperature variations
  • Fiducial recovery function that eliminates the need to remove and clean the PCB
  • Feeder indicators that simplify setup and reduce feeder setup
  • Double board support system that decreases board transfer time
  • Force control
  • Tape cutting

 

Hawker Richardson is the Australian/New Zealand distributor for SMT placement machines. Call or email to receive further information or assistance with your surface mount automation application. Allow Hawker Richardson to be your partner in productivity.

Enquire Now

  1. Name(*)
    Please let us know your name.
  2. Company
    Invalid Input
  3. Phone
    Invalid Input
  4. Email(*)
    Please let us know your email address.
  5. How did you find us?(*)
    Invalid Input
  6. Optional Message(*)
    Please let us know your message.
  7. Invalid Input